TI Introduces Small and Low Power Battery Management Solution for Wearables and IoT Products

Delivering optimal battery life while reducing power consumption, Texas Instruments (TI) has introduced a highly integrated battery management solution presenting the industrys lowest quiescent current (Iq) at 700-nA with the buck converter, operating at 1.8 V. The bq25120 features a linear charger, configurable LDO, load switch, buck converter, pushbutton control and battery voltage monitor all in one. The solution supports batteries from 3.6 V to 4.65 V, and fast charge currents from 5 mA to 300 mA, allowing wearables and industrial Internet of Things (IoT) applications to always be on without draining the battery.

The bq25120 maintains an always-on 1.8 V operation using power path technology and a low Iq buck converter. A host microprocessor, such as a TI host microprocessor or Bluetoothradio, such as TIs SimpleLink Bluetooth Smart CC2640 wireless MCU, is able to continue running during recharging by not extracting empty energy. Designers can also achieve the longest battery shelf life as the solution features standby mode quiescent current of 50 nA.

A configurable load switch/LDO output optimizes the system by shutting off rarely used functions such as radios and displays to minimize battery drain. The solution also includes an integrated battery voltage monitor, enabling a state of charge indicator, buck converter and pushbutton control features.

The solutions 2.5 mm by 2.5 mm WCSP package enables a small footprint making it easier for designers to integrate it into sleek wearable designs. For an even more robust solution, designers can incorporate the CC2640 wireless MCU as it is the industrys smallest QFN package solution with integrated Flash for Bluetooth Smart.

The accurate charge termination down to 500-Afeature maximizes the energy delivered to the battery before completing the charging cycle, allowing batteries to draw a more robust full charge. Additionally, the bq25120s I2C programming interface gives designers the ability to set key parameters including battery charger voltage, current, termination threshold, input current limit, load switch control, flexible timer and reset options and more.

The bq25120 can be used in conjunction with devices to integrate more end application features. Ultra-low Iq step-down converter, the TPS62743 can be used for additional buck output. Boost converters can also be used for display integration. The TPS61046 offers a 12V boost and the TPS61240 with load connect, offers a 5-V boost for heart rate monitor or small displays.

Comments are closed.